Subscribe to receive notifications of new posts:

Announcing WARP for Linux and Proxy Mode

2021-06-17

4 min read
This post is also available in 简体中文.

Last October we released WARP for Desktop, bringing a safer and faster way to use the Internet to billions of devices for free. At the same time, we gave our enterprise customers the ability to use WARP with Cloudflare for Teams. By routing all an enterprise's traffic from devices anywhere on the planet through WARP, we’ve been able to seamlessly power advanced capabilities such as Secure Web Gateway and Browser Isolation and, in the future, our Data Loss Prevention platforms.

Today, we are excited to announce Cloudflare WARP for Linux and, across all desktop platforms, the ability to use WARP with single applications instead of your entire device.

What is WARP?

WARP was built on the philosophy that even people who don’t know what “VPN” stands for should be able to still easily get the protection a VPN offers. It was also built for those of us who are unfortunately all too familiar with traditional corporate VPNs, and need an innovative, seamless solution to meet the challenges of an always-connected world.

Enter our own WireGuard implementation called BoringTun.

The WARP application uses BoringTun to encrypt traffic from your device and send it directly to Cloudflare’s edge, ensuring that no one in between is snooping on what you're doing. If the site you are visiting is already a Cloudflare customer, the content is immediately sent down to your device. With WARP+, we use Argo Smart Routing to use the shortest path through our global network of data centers to reach whomever you are connecting to.

Combined with the power of 1.1.1.1 (the world's fastest public DNS resolver), WARP keeps your traffic secure, private and fast. Since nearly everything you do on the Internet starts with a DNS request, choosing the fastest DNS server across all your devices will accelerate almost everything you do online.

Bringing WARP to Linux

When we built out the foundations of our desktop client last year, we knew a Linux client was something we would deliver. If you have ever shipped software at this scale, you'll know that maintaining a client across all major operating systems is a daunting (and error-prone) task. To avoid these pitfalls, we wrote the core of the product in Rust, which allows for 95% of the code to be shared across platforms.

Internally we refer to this common code as the shared Daemon (or Service, for Windows folks), and it allows our engineers to spend less time duplicating code across multiple platforms while ensuring most quality improvements hit everyone at the same time. The really cool thing about this is that millions of existing WARP users have already helped us solidify the code base for Linux!

The other 5% of code is split into two main buckets: UI and quirks of the operating system. For now, we are forgoing a UI on Linux and instead working to support three distributions:

  • Ubuntu

  • Red Hat Enterprise Linux

  • CentOS

We want to add more distribution support in the future, so if your favorite distro isn't there, don’t despair — the client may in fact already work with other Debian and Redhat based distributions, so please give it a try. If we missed your favorite distribution, we’d love to hear from you in our Community Forums.

So without a UI — what's the mechanism for controlling WARP? The command line, of course! Keen observers may have noticed an executable that already ships with each client called the warp-cli. This platform-agnostic interface is already the preferred mechanism of interacting with the daemon by some of our engineers and is the main way you’ll interact with WARP on Linux.

Installing Cloudflare WARP for Linux

Seasoned Linux developers can jump straight to https://pkg.cloudflareclient.com/install. After linking our repository, get started with either sudo apt install cloudflare-warp or sudo yum install cloudflare-warp, depending on your distribution.

For more detailed installation instructions head over to our WARP Client documentation.

Using the CLI

Once you’ve installed WARP, you can begin using the CLI with a single command:

warp-cli --help

The CLI will display the output below.

~$ warp-cli --help
WARP 0.2.0
Cloudflare
CLI to the WARP service daemon
 
USAGE:
    warp-cli [FLAGS] [SUBCOMMAND]
 
FLAGS:
        --accept-tos    Accept the Terms of Service agreement
    -h, --help          Prints help information
    -l                  Stay connected to the daemon and listen for status changes and DNS logs (if enabled)
    -V, --version       Prints version information
 
SUBCOMMANDS:
    register                    Registers with the WARP API, will replace any existing registration (must be run
                                before first connection)
    teams-enroll                Enroll with Cloudflare for Teams
    delete                      Deletes current registration
    rotate-keys                 Generates a new key-pair, keeping the current registration
    status                      Asks the daemon to send the current status
    warp-stats                  Retrieves the stats for the current WARP connection
    settings                    Retrieves the current application settings
    connect                     Asks the daemon to start a connection, connection progress should be monitored with
                                -l
    disconnect                  Asks the daemon to stop a connection
    enable-always-on            Enables always on mode for the daemon (i.e. reconnect automatically whenever
                                possible)
    disable-always-on           Disables always on mode
    disable-wifi                Pauses service on WiFi networks
    enable-wifi                 Re-enables service on WiFi networks
    disable-ethernet            Pauses service on ethernet networks
    enable-ethernet             Re-enables service on ethernet networks
    add-trusted-ssid            Adds a trusted WiFi network, for which the daemon will be disabled
    del-trusted-ssid            Removes a trusted WiFi network
    allow-private-ips           Exclude private IP ranges from tunnel
    enable-dns-log              Enables DNS logging, use with the -l option
    disable-dns-log             Disables DNS logging
    account                     Retrieves the account associated with the current registration
    devices                     Retrieves the list of devices associated with the current registration
    network                     Retrieves the current network information as collected by the daemon
    set-mode                    
    set-families-mode           
    set-license                 Attaches the current registration to a different account using a license key
    set-gateway                 Forces the app to use the specified Gateway ID for DNS queries
    clear-gateway               Clear the Gateway ID
    set-custom-endpoint         Forces the client to connect to the specified IP:PORT endpoint
    clear-custom-endpoint       Remove the custom endpoint setting
    add-excluded-route          Adds an excluded IP
    remove-excluded-route       Removes an excluded IP
    get-excluded-routes         Get the list of excluded routes
    add-fallback-domain         Adds a fallback domain
    remove-fallback-domain      Removes a fallback domain
    get-fallback-domains        Get the list of fallback domains
    restore-fallback-domains    Restore the fallback domains
    get-device-posture          Get the current device posture
    override                    Temporarily override MDM policies that require the client to stay enabled
    set-proxy-port              Set the listening port for WARP proxy (127.0.0.1:{port})
    help                        Prints this message or the help of the given subcommand(s)

You can begin connecting to Cloudflare’s network with just two commands. The first command, register, will prompt you to authenticate. The second command, connect, will enable the client, creating a WireGuard tunnel from your device to Cloudflare’s network.

~$ warp-cli register
Success
~$ warp-cli connect
Success

Once you’ve connected the client, the best way to verify it is working is to run our trace command:

~$ curl https://www.cloudflare.com/cdn-cgi/trace/

And look for the following output:

warp=on

Want to switch from encrypting all traffic in WARP to just using our 1.1.1.1 DNS resolver? Use the warp-cli set-mode command:

~$ warp-cli help set-mode
warp-cli-set-mode 
 
USAGE:
    warp-cli set-mode [mode]
 
FLAGS:
    -h, --help       Prints help information
    -V, --version    Prints version information
 
ARGS:
    <mode>     [possible values: warp, doh, warp+doh, dot, warp+dot, proxy]
~$ warp-cli set-mode doh
Success

Protecting yourself against malware with 1.1.1.1 for Families is just as easy, and it can be used with either WARP enabled or in straight DNS mode:

~$ warp-cli set-families-mode --help
warp-cli-set-families-mode 
 
USAGE:
    warp-cli set-families-mode [mode]
 
FLAGS:
    -h, --help       Prints help information
    -V, --version    Prints version information
 
ARGS:
    <mode>     [possible values: off, malware, full]
~$ warp-cli set-families-mode malware
Success

A note on Cloudflare for Teams support

Cloudflare for Teams support is on the way, and just like our other clients, it will ship in the same package. Stay tuned for an in-app update or reach out to your Account Executive to be notified when a beta is available.

We need feedback

If you encounter an error, send us feedback with the sudo warp-diag feedback command:

~$ sudo warp-diag feedback

For all other functionality check out warp-cli --help or see our documentation here.

WARP as a Local Proxy

When WARP launched in 2019, one of our primary goals was ease of use. You turn WARP on and all traffic from your device is encrypted to our edge. Through all releases of the client, we’ve kept that as a focus. One big switch to turn on and you are protected.

However, as we’ve grown, so have the requirements for our client. Earlier this year we released split tunnel and local domain fallback as a way for our Cloudflare for Teams customers to exclude certain routes from WARP. Our consumer customers may have noticed this stealthily added in the last release as well. We’ve heard from customers who want to deploy WARP in one additional mode: Single Applications. Today we are also announcing the ability for our customers to run WARP in a local proxy mode in all desktop clients.

When WARP is configured as a local proxy, only the applications that you configure to use the proxy (HTTPS or SOCKS5) will have their traffic sent through WARP. This allows you to pick and choose which traffic is encrypted (for instance, your web browser or a specific app), and everything else will be left open over the Internet.

Because this feature restricts WARP to just applications configured to use the local proxy, leaving all other traffic unencrypted over the Internet by default, we’ve hidden it in the advanced menu. To turn it on:

1. Navigate to Preferences -> Advanced and click the Configure Proxy button.

2. On the dialog that opens, check the box and configure the port you want to listen on.

3. This will enable a new mode you can select from:

To configure your application to use the proxy, you want to specify 127.0.0.1 for the address and the value you specified for a port (40000 by default). For example, if you are using Firefox, the configuration would look like this:

Download today

You can start using these capabilities right now by visiting https://one.one.one.one. We’re super excited to hear your feedback.

Cloudflare's connectivity cloud protects entire corporate networks, helps customers build Internet-scale applications efficiently, accelerates any website or Internet application, wards off DDoS attacks, keeps hackers at bay, and can help you on your journey to Zero Trust.

Visit 1.1.1.1 from any device to get started with our free app that makes your Internet faster and safer.

To learn more about our mission to help build a better Internet, start here. If you're looking for a new career direction, check out our open positions.
WARPProduct NewsCloudflare Zero Trust1.1.1.1Cloudflare GatewaySecurityZero Trust

Follow on X

Kyle Krum|@KyleKrum
Cloudflare|@cloudflare

Related posts

October 06, 2024 11:00 PM

Enhance your website's security with Cloudflare’s free security.txt generator

Introducing Cloudflare’s free security.txt generator, empowering all users to easily create and manage their security.txt files. This feature enhances vulnerability disclosure processes, aligns with industry standards, and is integrated into the dashboard for seamless access. Strengthen your website's security today!...

October 02, 2024 1:00 PM

How Cloudflare auto-mitigated world record 3.8 Tbps DDoS attack

Over the past couple of weeks, Cloudflare's DDoS protection systems have automatically and successfully mitigated multiple hyper-volumetric L3/4 DDoS attacks exceeding 3 billion packets per second (Bpps). Our systems also automatically mitigated multiple attacks exceeding 3 terabits per second (Tbps), with the largest ones exceeding 3.65 Tbps. The scale of these attacks is unprecedented....

September 27, 2024 1:00 PM

Advancing cybersecurity: Cloudflare implements a new bug bounty VIP program as part of CISA Pledge commitment

Cloudflare strengthens its commitment to cybersecurity by joining CISA's "Secure by Design" pledge. In line with this commitment, we're enhancing our vulnerability disclosure policy by launching a VIP bug bounty program, giving top researchers early access to our products. Keep an eye out for future updates regarding Cloudflare's CISA pledge as we work together to shape a safer digital future....