Subscribe to receive notifications of new posts:

Magic Firewall gets Smarter

2021-12-09

4 min read
This post is also available in 简体中文, Indonesia, ไทย and 日本語.
Magic Firewall gets Smarter

Today, we're very excited to announce a set of updates to Magic Firewall, adding security and visibility features that are key in modern cloud firewalls. To improve security, we’re adding threat intel integration and geo-blocking. For visibility, we’re adding packet captures at the edge, a way to see packets arrive at the edge in near real-time.

Magic Firewall is our network-level firewall which is delivered through Cloudflare to secure your enterprise. Magic Firewall covers your remote users, branch offices, data centers and cloud infrastructure. Best of all, it’s deeply integrated with Cloudflare, giving you a one-stop overview of everything that’s happening on your network.

A brief history of firewalls

We talked a lot about firewalls on Monday, including how our firewall-as-a-service solution is very different from traditional firewalls and helps security teams that want sophisticated inspections at the Application Layer. When we talk about the Application Layer, we’re referring to OSI Layer 7. This means we’re applying security features using semantics of the protocol. The most common example is HTTP, the protocol you’re using to visit this website. We have Gateway and our WAF to protect inbound and outbound HTTP requests, but what about Layer 3 and Layer 4 capabilities? Layer 3 and 4 refer to the packet and connection levels. These security features aren’t applied to HTTP requests, but instead to IP packets and (for example) TCP connections. A lot of folks in the CIO organization want to add extra layers of security and visibility without resorting to decryption at Layer 7. We’re excited to talk to you about two sets of new features that will make your lives easier: geo-blocking and threat intel integration to improve security posture, and packet captures to get you better visibility.

Threat Intel and IP Lists

Magic Firewall is great if you know exactly what you want to allow and block. You can put in rules that match exactly on IP source and destination, as well as bitslicing to verify the contents of various packets. However, there are many situations in which you don’t exactly know who the bad and good actors are: is this IP address that’s trying to access my network a perfectly fine consumer, or is it part of a botnet that’s trying to attack my network?

The same goes the other way: whenever someone inside your network is trying to create a connection to the Internet, how do you know whether it’s an obscure blog or a malware website? Clearly, you don’t want to play whack-a-mole and try to keep track of every malicious actor on the Internet by yourself. For most security teams, it’s nothing more than a waste of time! You’d much rather rely on a company that makes it their business to focus on this.

Today, we're announcing Magic Firewall support for our in-house Threat Intelligence feed. Cloudflare sees approximately 28 million HTTP requests each second and blocks 76 billion cyber threats each day. With almost 20% of the top 10 million Alexa websites on Cloudflare, we see a lot of novel threats pop up every day. We use that data to detect malicious actors on the Internet and turn it into a list of known malicious IPs. And we don’t stop there: we also integrate with a number of third party vendors to augment our coverage.

To match on any of the threat intel lists, just set up a rule in the UI as normal:

Adding rules using threat intel feeds.

Threat intel feed categories include Malware, Anonymizer and Botnet Command-and-Control centers. Malware and Botnet lists cover properties on the Internet distributing malware and known command and control centers. Anonymizers contain a list of known forward proxies that allow attackers to hide their IP addresses.

In addition to the managed lists, you also have the flexibility of creating your own lists, either to add your own known set of malicious IPs or to make management of your known good network endpoints easier. As an example, you may want to create a list of all your own servers. That way, you can easily block traffic to and from it from any rule, without having to replicate the list each time.

Another particularly gnarly problem that many of our customers deal with is geo restrictions. Many are restricted in where they are allowed (or want to) accept traffic from and to. The challenge here is that nothing about an IP address tells you anything about the geolocation of it. And even worse, IP addresses regularly change hands, moving from one country to the other.

As of today, you can easily block or allow traffic to any country, without the management hassle that comes with maintaining lists yourself. Country lists are kept up to date entirely by Cloudflare, all you need to do is set up a rule matching on the country and we’ll take care of the rest.

Rule matching on country

Packet captures at the edge

Finally, we’re releasing a very powerful feature: packet captures at the edge. A packet capture is a pcap file that contains all packets that were seen by a particular network box (usually a firewall or router) during a specific time frame. Packet captures are useful if you want to debug your network: why can’t my users connect to a particular website? Or you may want to get better visibility into a DDoS attack, so you can put up better firewall rules.

Traditionally, you’d log into your router or firewall and start up something like tcpdump. You’d set up a filter to only match on certain packets (packet capture files can quickly get very big) and grab the file. But what happens if you want coverage across your entire network: on-premises, offices and all your cloud environments? You’ll likely have different vendors for each of those locations and have to figure out how to get packet captures from all of them. Even worse, some of them might not even support grabbing packet captures.

With Magic Firewall, grabbing packet captures across your entire network becomes simple: because you run a single network-firewall-as-a-service, you can grab packets across your entire network in one go. This gets you instant visibility into exactly where that particular IP is interacting with your network, regardless of physical or virtual location. You have the option of grabbing all network traffic (warning, it might be a lot!) or set a filter to only grab a subset. Filters follow the same Wireshark syntax that Magic Firewall rules use:

(ip.src in $cf.anonymizer)

We think these are great additions to Magic Firewall, giving you powerful primitives to police traffic and tooling to gain visibility into what’s actually going on in your network. Threat Intel, geo blocking and IP lists are all available today — reach out to your account team to have them activated. Packet captures is entering early access later in December. Similarly, if you’re interested, please reach out to your account team!

Cloudflare's connectivity cloud protects entire corporate networks, helps customers build Internet-scale applications efficiently, accelerates any website or Internet application, wards off DDoS attacks, keeps hackers at bay, and can help you on your journey to Zero Trust.

Visit 1.1.1.1 from any device to get started with our free app that makes your Internet faster and safer.

To learn more about our mission to help build a better Internet, start here. If you're looking for a new career direction, check out our open positions.
CIO WeekMagic FirewallMagic TransitSecurityThreat Intelligence

Follow on X

Cloudflare|@cloudflare

Related posts

October 02, 2024 1:00 PM

How Cloudflare auto-mitigated world record 3.8 Tbps DDoS attack

Over the past couple of weeks, Cloudflare's DDoS protection systems have automatically and successfully mitigated multiple hyper-volumetric L3/4 DDoS attacks exceeding 3 billion packets per second (Bpps). Our systems also automatically mitigated multiple attacks exceeding 3 terabits per second (Tbps), with the largest ones exceeding 3.65 Tbps. The scale of these attacks is unprecedented....

September 27, 2024 1:00 PM

AI Everywhere with the WAF Rule Builder Assistant, Cloudflare Radar AI Insights, and updated AI bot protection

This year for Cloudflare’s birthday, we’ve extended our AI Assistant capabilities to help you build new WAF rules, added new AI bot & crawler traffic insights to Radar, and given customers new AI bot blocking capabilities...

September 27, 2024 1:00 PM

Advancing cybersecurity: Cloudflare implements a new bug bounty VIP program as part of CISA Pledge commitment

Cloudflare strengthens its commitment to cybersecurity by joining CISA's "Secure by Design" pledge. In line with this commitment, we're enhancing our vulnerability disclosure policy by launching a VIP bug bounty program, giving top researchers early access to our products. Keep an eye out for future updates regarding Cloudflare's CISA pledge as we work together to shape a safer digital future....